A Balanced-to-Unbalanced Microstrip Power Divider With Filtering Function

A Balanced-to-Unbalanced Microstrip Power Divider With Filtering Function

 A balanced-to-unbalanced microstrip power divider based on branch lines with several stubs and one resistor is proposed. The functions of power dividing, frequency selectivity, isolation between output ports, and common-mode suppression can be realized at the same time. The even–odd-mode equivalent circuits combining with the standard S-parameters and the mixed-mode S-parameters are adopted to derive the analytical equations at the center frequency. One or two transmission zeros can be achieved to enhance the out-of-band suppression. The center frequency, bandwidth, isolation, common-mode suppression, and the frequencies of transmission zeros can be controlled by the design procedure. To verify the theoretical prediction, two fabricated prototypes are designed and compared. One gets 7.7% 1-dB bandwidth with 0.6-dB insertion loss and one transmission zero. The other gets 1-dB bandwidth of 5% with 0.7-dB insertion loss and two transmission zeros. The isolation and common-mode suppression for both prototypes are better than 15 and 20 dB within the whole passband, respectively.